Material: NON ASBESTOS SHEET Made of special non-asbestos heat-resisting Fibre, heat-resisting packing material and nature rubber compound heating and compression molding it.
Uses: Substitution of corresponding models of asbestos rubber sheet ,Used for the equipment in water,steam,etc.and used as sealing material in the joints of pipeline
Working pressure: 1.5Mpa
Working temperature: 200C
4100 x 1500 x (0.5 – 6.0)mm, 2000 x 1500 x (0.5 – 6.0)mm,
1500 x 1360 x (0.5 – 6.0)mm, 3810 x 1270 x (0.5 – 6.0)mm
1270 x 1270 x (0.5 – 6.0)mm, 1500 x 1500 x (0.5 – 6.0)mm
The other size is optional or according to the requirements of customers.
Packing: in wooden pallet of about 1000 kgs, 2000kgs net each.
Material: Asbestos jointing sheet，Asbestos jointing sheet with wire reinforced ， Oil-resistance asbestos jointing sheet ， ACID-resistance asbestos jointing sheet
Used for the equipment in water,steam,etc.and used as sealing material in the joints of pipeline
Working pressure: 0.8Mpa
Max working temperature:150C
Sizes: 4100 x 1500 x (0.5 – 6.0)mm, 2000 x 1500 x (0.5 – 6.0)mm,
1500 x 1360 x (0.5 – 6.0)mm, 3810 x 1270 x (0.5 – 6.0)mm
1270 x 1270 x (0.5 – 6.0)mm, 1500 x 1500 x (0.5 – 6.0)mm .
Application: checker rubber sheet is widely used in electronic,texile,printing and dyeing industry,military enterparises and laying in places with higher requirements.For special specification and technical requirements,we will design new products based on customers' requirements.
Length:Normally 10 meters per roll.Or as per your requested.
Width:can be in 1m to 2m or cutting in other width.
Thickness: from 1mm to 50mm
Finishment: smoothly glossy finish or both side fabrics impress on finish.
Reforcement:Insertion with one or two / multiple plies are also available, special purpose rubber sheet available on customize basis.
NR: high flexibility,good comprehensive physical mechanic performance.
SBR: better wear-resistant and anti-aging function than NR,low prices.
CR(Neoprene): good climate resistant,ozone proof,hot resistance and chemical resistant.
NBR: good oil-resistant,wear-resistant and anti-aging.
EPDM: good anti-aging,ozone proof,polar liquid resistant,good electric performance,lightest rubber.
Butyl:low permeability,good anti-aging.
Sillicon: Excellent oil and fats resistance and for high temperatureup to 260. high resistant one can reach to 250-270 C.
Viton: For high temperature up to 300 C.
Gasket,asbestos Gasket,non Asbestos Gasket,ptfe Gasket,ptfe Sheet,spiral Wound Gasket.
Product Description:non asbestos gasket is for all kinds of pump,pipe flange etc sealing materials gasket,The product is made of non-Asbestos sheet It is a new material that will substitute asbestos products.The product has excellent performance in dilatability, sealing equality and long life etc..Mainly applied in automobile farming machine, motorcycle and engineering etc.,it is also can be used in high strength gaskets and cylinder gaskets etc.
Non asbestos gasket
No two materials are identical.So caution must always be exercised.In general the common "Binders"are:
NBR-good for oils,gas,mild chemicals and water.
SBR-good for saturated steam,mild chemicals inert gas and water.
Neoprene-good for saturated steam refrigerants,oils,fuels,mild acids and alkalies and water.
EPDM-good for saturated steam,mild chemicals and water. .
You must also consider for cut gasket size,temperature,Application,media,pressure,speed(if dynamic)of your specific application.if this is for a finished gasket you will also want to consider bolt loads,the size of bolts,the number of bolts,the bolt material and the available torque.
We at Hebei Hengda Sealing can assist you with a material selection of non-asbestos gasket materials or sell to you non-asbestos gasket material on-line. .
It has good sliding velocity, thermal conductivity, and excellent resistance to chemical attack.
Main Features and Application Withstands elevated temperatures and aggressive chemicals,low coefficient of friction It can be used to seal hot water, high temperature and pressure steam, heat transfer fluid, hydrogen gas, ammonia,organic solvents,hydrocarbons, cryogenic liquids etc..
Flexible Graphite Gland Packing：Braided packing made of flexible pure graphite with structural textile fibres.
PTFE Packing ： PTFE packing with lubricating assitive.
PTFE Packing with Graphite ： PTFE filament yarn with permanently added PTFE graphite dispersion. The specially developed silicon-oil-free substance has excellent sliding characteristics and is incorporated in the packing by a special process
Aramid(Kevlar) Braided Packing ： A high-quality, smooth, synthetic aramide endless fibres(Kevlar) with PTFE impregnation and lubricant additive. Extremely hard wearing. PTFE with Kevlar gland Packing ： A high-quality combination consistion of graphite-incorporated PTFE with sliding surface reinforcment made of aramide endless fibres(Kevlar).
The glass wool product is placed in the glass of the meltdown appearance proceed the fiber turn and spray the resin of solid that draw the hot silk wadding form material, then turn through hot solid the deep processing handles and can also make into the series and various products. It is the most superior heat preservation material current generally accepted by people. This kind of material which can be make into board, tube, blanket , is widely used for insulation and heat preservation of building, chemistry, electric power, metallurgy...etc
packing details: PP and PE Vacuum Packing, We can print your logo on package, OEM service can be offered
1). Long and thin glass fiber is good for thermal insulation and sound absorbing.
2). Excellent rebound degree can be up to 99.2%.when unpacked in 24 hours.
3). Grade A1 incombustible materials.Competitive Price Glass Wool,Glasswool Insulation,Glasswool
4). Low moisture absorption; stable physical properties.
5). Easy for construction; cutting at will.
applications: Rock wool insulation materials are widely used in construction wall, roof, industrial furnace,oven, heat-treating equipment, storage tank, storage groove, power house, flue, petrifaction and oil refining equipment and all kinds of keeping-warm and heat insulation pipelines.
Length:Less than 12m
Packing: in polythene plastic thermal-shrink bags.